Fruit rot in blackberries, strawberries, and raspberries are usually the result of one chief offender and that offender is known as gray mold. Gray mold is able to affect not only the fruit itself, but the petals, stems, and the flower stalk. Fruit are a popular breeding ground for mold, due to the juices in the fruit. A wet environment is the ideal place for mold to try and grow, and the juices contained in the fruit helped provide just the environment mold calls for. Gray mold is considered the most serious disease, especially during a warm and rainy growing season.
The kind of fruit with the least amount of protection against gray mold infection is young fruit blossoms. And when the infection becomes apparent in large clusters of fruit. The blossoms will show the infection as a soft, light brown and the spot will continue grow at a fast rate. The fruit will become powdery and gray if the fruit is left defenseless against the mold. This is where the name “gray mold” originated from.
The areas of the fruit that are most susceptible to infection are located near the middle of the plant where the branches and leaves cause high humidity and air circulation is lacking. If the fruit has been exposed to the ground where soil has captured water condensation the risk is higher, as that condensation will attract bacteria and will cause mold to grow. As the mold grows, the rot will begin to set in and any fruits nearby could be infected if not tended to in a timely manner.
And while mature fruits are less susceptible after they are picked, they are susceptible never the less. However, recently harvested green fruits will become just as infected, and the disease isn’t usually detected until the fruit is fully ready to be harvested. Bruising or breaking of the skin is a major cause of the infection in mature fruits. This is, once again, because of the juice on the inside of the fruit attracting bacteria. The mature fruit can be completely rotted in as short an amount of time as forty eight hours.
There are, however, ways to prevent gray mold from infesting your fruit. First, you should select where to plant a fruit where there is a decent amount of soil drainage and air circulation. They need to be exposed directly to sunlight. You should also make sure to keep the garden weeded, as it helps airflow.
Jim Corkern is a writer and promoter of quality
Nebraska Flood Damage cleanup and other states and cities such as
New York mold remediation companies across the united states.
Wednesday, October 17, 2007
The Most Frequently Asked Questions About Mold
If you are a new homeowner or even an old one that is just wanting to do a little studying on what this whole concern about mold is that you have been hearing about on the news and in magazines, then there are a few basic things that you need to know about mold
What causes mold to grow?
Well, mold requires a few different things to grow and these are nutrients, air, and moisture. Molds can grow in cooler temperatures down to around 40 degrees Fahrenheit and up to even around 100 degrees Fahrenheit. If it gets cooler than 40 F, most molds will become simply dormant and cease growing. They are hard to kill by change in temperature alone. Temperatures above 100 F have been reported to kill mold and its spores, but the exact temperatures that are needed to kill specific species of mold are uncertain.
How does mold get into your house?
The truth is that mold is always in your home, but it only grows there when conditions are favorable. Spilled water on carpet that is never cleaned up, condensation on windows or water pipes is a sign of high humidity that helps mold grow, as well, and even something as seemingly harmless as packing your clothes too tightly in the closet can cause mold problems.
Do harmful molds exist?
Yes! While there are only a few different kinds of mold that cause human health issues compared to the thousands of different varieties of mold there are in the world, mold growing in your home can be a serious health risk.
Does mold cause health issues in everyone? Are they always the same?
No, mold does not typically affect one person the same as another. One person might be allergic to the mold growing in the home and another may not. Some molds can cause infections that are serious enough to see a doctor for and some can cause brain damage, miscarriages, birth defects, and in some cases, even death.
What can I do to prevent mold growth in my house or business?
There are a lot of things that you can do to prevent mold from growing both on the constructed parts of your home and the items that you have inside it, such as furniture, clothes, and etcetera. There are numerous articles online to help you in preventing mold from growing, but the general consensus is to not have a high level of humidity in any area of your home, such as in a bathroom that does not have a vent to allow steam to exit the room while bathing. A similar vent should be installed in the kitchen near the stove.
Jim Corkern is a writer and promoter of quality
Montana Flood Damage Cleanup
companies and
Water Damage Restoration" companies across the united states.
What causes mold to grow?
Well, mold requires a few different things to grow and these are nutrients, air, and moisture. Molds can grow in cooler temperatures down to around 40 degrees Fahrenheit and up to even around 100 degrees Fahrenheit. If it gets cooler than 40 F, most molds will become simply dormant and cease growing. They are hard to kill by change in temperature alone. Temperatures above 100 F have been reported to kill mold and its spores, but the exact temperatures that are needed to kill specific species of mold are uncertain.
How does mold get into your house?
The truth is that mold is always in your home, but it only grows there when conditions are favorable. Spilled water on carpet that is never cleaned up, condensation on windows or water pipes is a sign of high humidity that helps mold grow, as well, and even something as seemingly harmless as packing your clothes too tightly in the closet can cause mold problems.
Do harmful molds exist?
Yes! While there are only a few different kinds of mold that cause human health issues compared to the thousands of different varieties of mold there are in the world, mold growing in your home can be a serious health risk.
Does mold cause health issues in everyone? Are they always the same?
No, mold does not typically affect one person the same as another. One person might be allergic to the mold growing in the home and another may not. Some molds can cause infections that are serious enough to see a doctor for and some can cause brain damage, miscarriages, birth defects, and in some cases, even death.
What can I do to prevent mold growth in my house or business?
There are a lot of things that you can do to prevent mold from growing both on the constructed parts of your home and the items that you have inside it, such as furniture, clothes, and etcetera. There are numerous articles online to help you in preventing mold from growing, but the general consensus is to not have a high level of humidity in any area of your home, such as in a bathroom that does not have a vent to allow steam to exit the room while bathing. A similar vent should be installed in the kitchen near the stove.
Jim Corkern is a writer and promoter of quality
Montana Flood Damage Cleanup
companies and
Water Damage Restoration" companies across the united states.
Natural Born Mold Killers Can Save You From Chemical Exposure
While there are a lot of different commercial chemicals that are used to kill mold, a lot of people do not like to use a lot of household chemicals in their homes. There is a belief that the more we use chemicals in our daily lives, the more harm they will end up doing us and since there may be some truth to this, some people have found other ways to kill mold besides the cleaners that we find in department and grocery stores.
Three natural ingredients have been found to kill mold quite effectively, but two of them are quite expensive and one is, well… kind of stinky.
The most widely available and inexpensive of the three natural ways to kill mold is vinegar. It is by far the cheapest natural method and the most simple to use. Distilled white vinegar is the best kind to use because it has no color to it and there is no risk of discoloring anything you might put it on. Vinegar will reportedly kill around 82 percent of molds in your home. While it will not kill all kinds of mold, it will kill most of the kind that you find indoors and if it does not kill it, you will most assuredly know. All you have to do is put the mold into a spray bottle, spray it on the area of mold and if you can stand the smell, let it stay on the surface without rinsing it. The smell should go away after a few hours and the mold should have died soon after.
Another way to kill mold, even if it is a bit expensive, is tea tree oil. You can find this at most health food stores and it has a little more broad of a spectrum of fungi that it will get rid of than vinegar. Combine 2 teaspoons of tea tree oil with 2 cups of water in a spray bottle. Shake it up to blend the two and spray on anything that has mold on it. Do not rinse it off. This should make about two cups and it should last indefinitely.
The last way to do this is by using grapefruit seed extract. The advantage of this is that grapefruit seed extract has no smell to it. 20 drops of the extract and two cups of water in a spray bottle should do the trick. Follow the same directions for the tea tree oil.
Jim Corkern is a writer and promoter of quality
New York Basement Water extraction and other states and cities such as
new york city mold remediation companies across the united states.
Three natural ingredients have been found to kill mold quite effectively, but two of them are quite expensive and one is, well… kind of stinky.
The most widely available and inexpensive of the three natural ways to kill mold is vinegar. It is by far the cheapest natural method and the most simple to use. Distilled white vinegar is the best kind to use because it has no color to it and there is no risk of discoloring anything you might put it on. Vinegar will reportedly kill around 82 percent of molds in your home. While it will not kill all kinds of mold, it will kill most of the kind that you find indoors and if it does not kill it, you will most assuredly know. All you have to do is put the mold into a spray bottle, spray it on the area of mold and if you can stand the smell, let it stay on the surface without rinsing it. The smell should go away after a few hours and the mold should have died soon after.
Another way to kill mold, even if it is a bit expensive, is tea tree oil. You can find this at most health food stores and it has a little more broad of a spectrum of fungi that it will get rid of than vinegar. Combine 2 teaspoons of tea tree oil with 2 cups of water in a spray bottle. Shake it up to blend the two and spray on anything that has mold on it. Do not rinse it off. This should make about two cups and it should last indefinitely.
The last way to do this is by using grapefruit seed extract. The advantage of this is that grapefruit seed extract has no smell to it. 20 drops of the extract and two cups of water in a spray bottle should do the trick. Follow the same directions for the tea tree oil.
Jim Corkern is a writer and promoter of quality
New York Basement Water extraction and other states and cities such as
new york city mold remediation companies across the united states.
Learn How To Identify What Kind Of Mold You Are Dealing With
Mold is bad for us, we all know that, but just what different kinds of mold are there? They have been around since before the time of Christ and yet some people do not think that they need to be taken seriously as a real health threat. It grows everywhere and its one purpose in the natural world is to decompose dead organic matter. It is in our homes and on our lawns, on our food and on our clothes. You cannot truly do anything to completely get rid of it, but what you can do is educate yourself about what kinds of mold there are, what they can do to you, and how you can get rid of them.
There are about three different categories that a mold is classified into: pathogenic, allergenic, and toxic. The line between pathogenic molds and toxic molds is a little difficult to discern, but the allergenic mold class is not as dangerous as the other two.
Allergenic molds can either cause allergies or make allergies that a person already has even worse. It can make such things as asthma and emphysema aggravated and more difficult to deal with. The very young and the elderly particularly have a problem with these molds, because their immune systems are not as strong as a healthy young or middle aged adult. Symptoms include typical allergy symptoms such as coughing, sneezing, itchy or watery eyes, skin rashes, and etcetera.
Toxic molds produce what are called mycotoxins and even though these kinds of molds are not as common as allergenic or even pathogenic molds, they are extremely dangerous. These molds can even cause the death of a person if the circumstances are extreme enough and while “toxic black mold” has become a common term used in the news, it is usually referring to Stachybotrys atra or some other variant of Stachybotrys. This mold is typically found on wet items, especially on wet paper or woods. This mold has also been known to cause a baby to bleed from the lungs.
Pathogenic molds are molds that tend to cause opportunistic infections in people, such as penicilliosis, which is the third most common opportunistic infection in HIV patients in southeast Asia. This is a serious problem and anyone with a weakened immune system is very much at risk for contracting this condition, even if you are simply traveling to the region for a few days.
Jim Corkern is a writer and promoter of quality
New Jersey mold inspections and other states and cities such as
north carolina mold inspections companies across the united states.
There are about three different categories that a mold is classified into: pathogenic, allergenic, and toxic. The line between pathogenic molds and toxic molds is a little difficult to discern, but the allergenic mold class is not as dangerous as the other two.
Allergenic molds can either cause allergies or make allergies that a person already has even worse. It can make such things as asthma and emphysema aggravated and more difficult to deal with. The very young and the elderly particularly have a problem with these molds, because their immune systems are not as strong as a healthy young or middle aged adult. Symptoms include typical allergy symptoms such as coughing, sneezing, itchy or watery eyes, skin rashes, and etcetera.
Toxic molds produce what are called mycotoxins and even though these kinds of molds are not as common as allergenic or even pathogenic molds, they are extremely dangerous. These molds can even cause the death of a person if the circumstances are extreme enough and while “toxic black mold” has become a common term used in the news, it is usually referring to Stachybotrys atra or some other variant of Stachybotrys. This mold is typically found on wet items, especially on wet paper or woods. This mold has also been known to cause a baby to bleed from the lungs.
Pathogenic molds are molds that tend to cause opportunistic infections in people, such as penicilliosis, which is the third most common opportunistic infection in HIV patients in southeast Asia. This is a serious problem and anyone with a weakened immune system is very much at risk for contracting this condition, even if you are simply traveling to the region for a few days.
Jim Corkern is a writer and promoter of quality
New Jersey mold inspections and other states and cities such as
north carolina mold inspections companies across the united states.
Tips To Prevent Wildfire Damage
Even though wildfires are a part of the natural process of creation and destruction in the environment, the bad thing for people is that sometimes their homes are located directly in the path. A large number of people have to worry every year whether a wildfire will affect their area, but if you own your home and you know what to do, there are things that can protect your home from them. Depending on the circumstances and where your home is located, it may not be enough, but it certainly cannot hurt to try and you may actually end up saving your home.
Using fire-resistant materials on the exterior of your house is essential. The roofing material is the most important, since this has the largest amount of surface area and sparks of fire called firebrands will be picked up by the wind and possibly carried over your house. Having the fire-resistant roofing material such as metal, fiberglass, or tile will slow down the spread of the fire from the roof and it may not even catch on fire at all from one of these small sparks. You do not want to use oil-based roofing materials on a home that is located in a place at risk of wildfires.
Fire-resistant materials on the outer walls of your home will also slow down the spread of the fire, such as stone, metal, or brick, so if you are considering having a home built for you, these are materials you really want to consider. You should also have smaller windows on the exterior of your home, since large windows are more likely to break and allow the hot air and fire sparks from the outside of the house inside, where it will catch curtains and everything else. If you have to have large windows, have multi-pane ones instead of single-pane.
If there is a wildfire close to where you live, wet down the exterior of the house, especially your roof. This will give a little extra protection against firebrands floating by on the wind. Wetting down the yard and vegetation will also help, but you should do this just before you decide to leave the house.
Get rid of any dead vegetation in the yard and do not allow things like dead leaves to build up, since these are easy targets. If you do have a pile of leaves in your yard, the best thing that you can do before you evacuate is soak them down with water.
Jim Corkern is a writer and promoter of quality
Chicago Water and Sewage Extraction and other states and cities such as
North Carolina Water and Sewage Extraction companies across the united states.
Using fire-resistant materials on the exterior of your house is essential. The roofing material is the most important, since this has the largest amount of surface area and sparks of fire called firebrands will be picked up by the wind and possibly carried over your house. Having the fire-resistant roofing material such as metal, fiberglass, or tile will slow down the spread of the fire from the roof and it may not even catch on fire at all from one of these small sparks. You do not want to use oil-based roofing materials on a home that is located in a place at risk of wildfires.
Fire-resistant materials on the outer walls of your home will also slow down the spread of the fire, such as stone, metal, or brick, so if you are considering having a home built for you, these are materials you really want to consider. You should also have smaller windows on the exterior of your home, since large windows are more likely to break and allow the hot air and fire sparks from the outside of the house inside, where it will catch curtains and everything else. If you have to have large windows, have multi-pane ones instead of single-pane.
If there is a wildfire close to where you live, wet down the exterior of the house, especially your roof. This will give a little extra protection against firebrands floating by on the wind. Wetting down the yard and vegetation will also help, but you should do this just before you decide to leave the house.
Get rid of any dead vegetation in the yard and do not allow things like dead leaves to build up, since these are easy targets. If you do have a pile of leaves in your yard, the best thing that you can do before you evacuate is soak them down with water.
Jim Corkern is a writer and promoter of quality
Chicago Water and Sewage Extraction and other states and cities such as
North Carolina Water and Sewage Extraction companies across the united states.
Subscribe to:
Posts (Atom)
